欢迎访问busbarcuttingmachine官方网站！
+8613853146766
+8613853146766
303E-3 busbar punching shearing bending busbar shear machine
Main Function：
To cut/punch(all kingds of round/square/special holes and slot type)/chamfer/horizontal bending/vertical
bending/ emboss/Press cable thread /twist/anti-press flat the copper/aluminum busbar ect.
Function Introduction
●● 1. Cutting unit adopts double-column shear structure (patent number: ZL201120262802.1),Cut mouth flat, no
burr, no waste.
●● 2. Punching unit adopts Nodular cast iron,4/6/8 modes position turrent punching structure which is a totaly
whole one,improving concentric degree of moulds,prolonging the service life of the moulds,saving time of
change.
●● 3. Bending unit adopts closed bending structure,making it is more uniform when processing horizontal bending
and embossing. Also prolonging the service life.
●● 4. Bending unit adopts double work table,achieved a real sense of the three position working at thge same time
while working without impact each other.
●● 5. Adopting PLC controlled,compared to the traditional relay,more stable and reliable.
●● 6. Three units of the machine can work at the same time,not affecting each other,Improving the processing
efficiency.
●● 7. Hydraulic tank with thick plate welding,and is treated by phosphating, making hydraulic oil can be long time
used and will not degenerate.
The Paramter：
Item | Model | |
DGWMX303E-3-S | DGWMX303E-3 | |
Max. Punching Force (KN) | 300 | 300 |
Punching Diameter Range (MM) | Φ4.3-25 | Φ4.3-25 |
Max. Process Thickness (MM) | 12×160 | 12×160 |
Max. Vertical Bending Width (MM) | 120 | 120 |
Work Bench Size(MM) | 1500×1200/940×420 | 1500×1200/940×420 |
Size Of The Machine (MM) | 1750×1350×1500 | 1750×1350×1300 |
Weight Of The Machine(KG) | 1390KG | 1370KG |
Bending Angle Cnc | YES | NO |
The Three Units Work At The Same Time | YES | YES |